Semi-Permanent coating
The surfaces to be protected are treated first with a penetrating sealer (permanent protection component) which prevents the paints and varnishes from penetrating deep into the substrate. A temporary (sacrificial) layer is applied and subsequently „sacrificed“ when removing graffiti. A new coat needs to be applied.
Semi-Permanent protected surfaces can be cleaned in an environmentally friendly way using hot water high pressure. Chemical graffiti removers are usually not necessary. Semi-Permanent coating is ideal for natural stone walls and is frequently used for listed historic buildings.
Technical Process
Step 1.
Semi-Permanent coating
(A. sealer and B. sacrificial layer) is applied on
the surface.

Step 2.
Normal moisture evaporation through semi-permanent coating.

Step 3.
Paint is sprayed on the semi-permanent coating and is blocked at the surface by the sacrificial layer. The sealer prevents the paint from sinking deep into the substrate.

Step 4.
Graffiti and underlying coating are cleaned off with hot water high pressure. The sealer is not affected.

Step 5.
The sacrificial coating is re-applied on the affected areas.

Characteristics
environmentally friendly
hydrophobic (water repellent)
provides insulating protection
easy removal of graffiti
easy application, fast drying
reduces water absorption in surface pores
increases resistance against frost and thawing cycles
reduces the accumulation of dirt
protects against road salt, pollution, moss and mold
no optical change of the surface
reduces adhesion of posters
5 years function guarantee

Application range
Mineral substrates (unpainted):
- fired clay, clinker, brick
- concrete (raw/washed)
- limestone
Natural stone substrates (unpainted):
- sandstone
- marble / granite
- travertine
- all porous natural stones